Sterling Power

• M6 Bolts.
• 120x100x90mm (L,W,H)

Ideal where multiple power sources are used such as inverters, shore power and generators on a boat/vehicle.

16A Continuous Amps

300V Max Voltage

3 Inputs

1 Output

Ideal where multiple power sources are used such as inverters, shore power and generators on a boat/vehicle.

32A Continuous Amps

300V Max Voltage

3 Inputs

1 Output!!

• Includes temperature sensor with 1 metre of cable
• Digital software control with slow start
• Dynamic Progressive battery charging
• Can be used in parallel ( recommended ) or stand-alone regulator
• Programmable for different battery types
• Single unit fits 99% of alternators and all battery types
• Charges to 4 step progressive constant current charging curves
• Self-diagnosing fault system
• Totally isolates the advanced regulator in fault condition
• Information 8 LED display
• Battery Temperature sensing
• High battery temp trip
• High battery voltage trip
• High alternator voltage trip
• De-sulphating ability on open lead acid batteries
• In event of failure auto return to standard alternator regulator
• Can be used with or without the temperature sensor
• Monitors for excessive neg voltage drop and trips
• Protects batteries if temperature sensor open circuited
• Protects batteries if split charge relay/diode fails open
• Protects batteries if advanced reg fails closed
• Protects batteries if battery sense wire falls off
Please note that advanced regs are not suitable for modern vehicles/boats with integrated engine management systems as they increase the alternators voltage and this can be interpreted by the management system as a fault on the alternator. Please use an alternator to battery charger or battery to battery charger for these applications.

• M6 Bolts.
• 120x100x90mm (L,W,H)

• AC Input: 240V
• Fully encapsulated to meet toughest waterproofing standard (IP68)
• Both positive and negative fully isolated, this enables the unit to charge 12V or 24V
• 50Hz AC Frequency
• Suitable for all types of lead acid batteries (Wet, Gel, AGM, Calcium)
• Dynamic thermal output control
• LED power and charge indicators
• Built-in protection distributed-on-demand (Power Pack Mode)
• 3 stage charging curve
• Pre-wired 1.5M waterproof loom for easy installation
• Ignition protected, ideal for petrol boats
• Dimensions (L,W,H): 230 x 130 x 90mm
Charge rating explained: 12V System - 1 x 10A or 2 x 5A 24V System - 1 x 5A

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 260 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• Voltage: >40V
• Max Output: 70A
• Battery Outputs: 2
• Alternator Inputs: 1

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 260 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• LED Indicator
• 0.0V Volt Drop
• Back feed Protected
• Faster battery charging
• Built in safety algorithms to protect your batteries
• IP65
• 150 x 80 x 120mm (L,W,H)
5 times faster if combined with the Alternator Regulator.

• High End Charger in a
• Portable Package
• Built in LCD screen
• Auto or Manual Start
• 6 Charging Curves
• Various Battery Types
• Reduce Power Mode
• Input Voltage: 190-250V 50 Hz
• Output Voltage: 12V or 6V DC
• Dimensions: 190 x 115 x 70mm

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 315 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 260 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• Includes 10 meters of cable.
• Can be surfaced, recess or flush mounted.
• 110 x 68 x 20mm.

Ideal where multiple power sources are used such as inverters, shore power and generators on a boat/vehicle.

50A Continuous Amps

300V Max Voltage

3 Inputs

1 Output

• Built in split charger
• Power pack mode
• Automatic battery bank size and state sensing
• Battery temperature sensing and compensation
• LED output display
• Overload and short circuit protected
• 250 x 180 x 70mm

• Voltage: >40V
• Max Output: 130A
• Battery Outputs: 2
• Alternator Inputs: 1

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 315 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

The New Sterling Power Saturn Series DC to DC Charger. A highly reliable and adaptable solution for managing battery to battery setups in a marine or automotive environment. These chargers are designed for safe and efficient battery charging, particularly for lithium battery banks, ensuring the longevity of your alternator. They offer extensive customizability to suit various battery needs, and their ability to be installed in parallel provides redundancy and fine-tuned current control, making them a robust choice.

Features

• High Efficiency: Buck Boost design with 95-98% efficiency.
• Ease of Use: Simple installation and setup.
• Current Management: Features current limiting.
• Battery Compatibility: Lithium safe and compatible with 6 pre-set battery types.
• Alternator Compatibility: Smart Alternator/Euro 6+ compatible.
• Activation Modes: Ignition feed or Vibration Sense modes.
• Safety: Includes 6 self-recovering protections (under voltage, input over voltage, output over voltage, over current, charge over temperature).
• Lithium Protection: Low temperature trip for Lithium Ion batteries.
• Bidirectional Functionality: Most models offer reverse charging and jump start assistance mode.
• Optional Control: Can be used with the optional BBR remote control. (contact us for further info)
• Warranty: 5-year warranty
  

Specification

• Voltage: 12V - 12V
• Amps: 25A
• Dimensions: 125 x 130 x 56mm
• Fan Assisted: No

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 1800W Power (Continuous)
• Input: 12V DC
• Output: 230V AC
• Socket Type: British/Euro
• 300 x 250 x 100mm (L,W,D)

• Voltage: >40V
• Max Output: 90A
• Battery Outputs: 2
• Alternator Inputs: 1

• Voltage: >40V
• Max Output: 90A
• Battery Outputs: 3
• Alternator Inputs: 1

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 315 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 1800W Power (Continuous)
• Input: 24V DC
• Output: 230V AC
• Socket Type: British/Euro
• 300 x 250 x 100mm (L,W,D)

The PSRC Remote Control Panel is designed to provide seamless remote operation, this control panel allows you to monitor and manage your inverter from a distance, making it ideal for marine and campervan installations.

Key Features:

• Remote Operation: Control your PS Series Inverter from a convenient location.
• Easy Monitoring: Display panel provides real-time information on input voltage, output power level, and fault status.
  
• 10-meter Cable Included.

This portable induction hob is ideal for cooking in your van or boat. They are safer compared to gas burners and also feature fast controllable heat settings allowing you to cook with precision. 

The smooth A-grade crystal black plate is easy to wipe clean after use and also features overheat protection and auto shut-off with an induction pan on the hob. Portable and compact making it is easy to store and hide away when not in use. Maximum power consumption of 1500W, suitable to be paired with an inverter to run off your 12V battery.

Specifications:

• Voltage: 230VAC | 50Hz
• Maximum Power: 1500W
• Variable Power Consumption: 8 settings (200W-1500W)
• Power Indication on display
• Over Heat + Voltage + Current Protection
• Auto shut off in 1 minute without induction pan
• Plate Diameter: Ø260mm
• Housing Material: PP+ABS
• Power Source: Requires a Pure Sine Wave inverter for operation
• Double-Layered Coil Heating
• Cable Length: 1.5m with British Standard BS Plug
• Product Size: 282mm x 311mm x 72mm
• Approvals: CE, EMC, ROHS
• Part No: IHP

• Voltage: >40V
• Max Output: 70A
• Battery Outputs: 3
• Alternator Inputs: 1

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• 800W Power (Continuous)
• Input: 12V DC
• Output: 230V AC
• Socket Type: British/Euro
• 270 x 150 x 65mm (L,W,D)

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 2700W Power (Continuous)
• Input: 12V DC
• Output: 230V AC
• Socket Type: British/Euro
• 370 x 250 x 100mm (L,W,D)

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 1000W Power (Continuous)
• Input: 12V DC
• Output: 230V AC
• Socket Type: British/Euro
• 240 x 250 x 100mm (L,W,D)

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 260 x 215 x 90

The New Sterling Power Saturn Series DC to DC Charger. A highly reliable and adaptable solution for managing battery to battery setups in a marine or automotive environment. These chargers are designed for safe and efficient battery charging, particularly for lithium battery banks, ensuring the longevity of your alternator. They offer extensive customizability to suit various battery needs, and their ability to be installed in parallel provides redundancy and fine-tuned current control, making them a robust choice.

Features

• High Efficiency: Buck Boost design with 95-98% efficiency.
• Ease of Use: Simple installation and setup.
• Current Management: Features current limiting.
• Battery Compatibility: Lithium safe and compatible with 6 pre-set battery types.
• Alternator Compatibility: Smart Alternator/Euro 6+ compatible.
• Activation Modes: Ignition feed or Vibration Sense modes.
• Safety: Includes 6 self-recovering protections (under voltage, input over voltage, output over voltage, over current, charge over temperature).
• Lithium Protection: Low temperature trip for Lithium Ion batteries.
• Bidirectional Functionality: Most models offer reverse charging and jump start assistance mode.
• Optional Control: Can be used with the optional BBR remote control. (contact us for further info)
• Warranty: 5-year warranty
  

Specification

• Voltage: 12V - 12V
• Amps: 40A
• Dimensions: 160 x 130 x 56mm
• Fan Assisted: Yes