Sterling Power

Introducing the new PS Series Inverter, engineered for superior performance and reliability.

Designed to provide high-efficiency, pure sine wave output from 12V or 24V battery inputs, making them ideal for marine and off-grid applications. With a high surge power capability, they can handle motor starts and other demanding loads, ensuring your equipment runs smoothly. The power-saving mode conserves battery life when full power is not needed, and adjustable set points allow for customized energy management.

Equipped with a display panel and front panel indicator lights, the PS Series Inverters offer easy monitoring and control of input voltage, output power level, and fault status. The rugged, compact design ensures durability and easy installation, while built-in protection features like low input voltage, overload, short circuit, and over-temperature safeguards keep your system secure.

Whether you're powering essential appliances or charging electronic devices, the PS Series Inverters provide a reliable and efficient power solution for your marine and campervan adventures.

Features:

• High Efficiency: Optimized to deliver maximum power with minimal energy loss.
• Pure Sine Wave Output: Provides stable and clean electricity, safeguarding sensitive electronic equipment.
• Overload and Short Circuit Protection: Built-in safeguards to protect both the inverter and your devices.
• Temperature Control: Advanced cooling system to maintain optimal performance.
• Power Saving Mode: Conserve energy when full power is not needed.
• Tri-Colour Indicators: Show input voltage and output load level for easy monitoring.
• Advanced Microprocessor: Ensures smooth and efficient operation.
• Highly Reactive & Capacitive Loads: Capable of driving these loads at start moment.
• USB Output: Conveniently charge your electronic devices without the need for additional adapters or chargers.
• Front Panel Display: Easy monitoring and control of input voltage, output power level, and fault status.
• RCD Protection: Additional safety features to protect against electrical faults.
• Optional Remote Control Panel: Available separately for convenient remote operation.

Technical Specifications:

• Input Voltage: 12V
• Power: 1500W
• Output Voltage: 230V AC ± 3%
• Output Frequency: 50Hz ± 0.5Hz
• Output Waveform: Pure sine wave
• Efficiency: Up to 90%
• No-load Current Draw: <0.8A
• Protection: Overload, short circuit, high temperature
• Dimensions: 454 x 262 x 113 mm

Introducing the new PS Series Inverter, engineered for superior performance and reliability.

Designed to provide high-efficiency, pure sine wave output from 12V or 24V battery inputs, making them ideal for marine and off-grid applications. With a high surge power capability, they can handle motor starts and other demanding loads, ensuring your equipment runs smoothly. The power-saving mode conserves battery life when full power is not needed, and adjustable set points allow for customized energy management.

Equipped with a display panel and front panel indicator lights, the PS Series Inverters offer easy monitoring and control of input voltage, output power level, and fault status. The rugged, compact design ensures durability and easy installation, while built-in protection features like low input voltage, overload, short circuit, and over-temperature safeguards keep your system secure.

Whether you're powering essential appliances or charging electronic devices, the PS Series Inverters provide a reliable and efficient power solution for your marine and campervan adventures.

Features:

• High Efficiency: Optimized to deliver maximum power with minimal energy loss.
• Pure Sine Wave Output: Provides stable and clean electricity, safeguarding sensitive electronic equipment.
• Overload and Short Circuit Protection: Built-in safeguards to protect both the inverter and your devices.
• Temperature Control: Advanced cooling system to maintain optimal performance.
• Power Saving Mode: Conserve energy when full power is not needed.
• Tri-Colour Indicators: Show input voltage and output load level for easy monitoring.
• Advanced Microprocessor: Ensures smooth and efficient operation.
• Highly Reactive & Capacitive Loads: Capable of driving these loads at start moment.
• USB Output: Conveniently charge your electronic devices without the need for additional adapters or chargers.
• Front Panel Display: Easy monitoring and control of input voltage, output power level, and fault status.
• RCD Protection: Additional safety features to protect against electrical faults.
• Optional Remote Control Panel: Available separately for convenient remote operation.

Technical Specifications:

• Input Voltage: 12V
• Power: 2000W
• Output Voltage: 230V AC ± 3%
• Output Frequency: 50Hz ± 0.5Hz
• Output Waveform: Pure sine wave
• Efficiency: Up to 90%
• No-load Current Draw: <0.8A
• Protection: Overload, short circuit, high temperature
• Dimensions: 454 x 262 x 113 mm

Introducing the new PS Series Inverter, engineered for superior performance and reliability.

Designed to provide high-efficiency, pure sine wave output from 12V or 24V battery inputs, making them ideal for marine and off-grid applications. With a high surge power capability, they can handle motor starts and other demanding loads, ensuring your equipment runs smoothly. The power-saving mode conserves battery life when full power is not needed, and adjustable set points allow for customized energy management.

Equipped with a display panel and front panel indicator lights, the PS Series Inverters offer easy monitoring and control of input voltage, output power level, and fault status. The rugged, compact design ensures durability and easy installation, while built-in protection features like low input voltage, overload, short circuit, and over-temperature safeguards keep your system secure.

Whether you're powering essential appliances or charging electronic devices, the PS Series Inverters provide a reliable and efficient power solution for your marine and campervan adventures.

Features:

• High Efficiency: Optimized to deliver maximum power with minimal energy loss.
• Pure Sine Wave Output: Provides stable and clean electricity, safeguarding sensitive electronic equipment.
• Overload and Short Circuit Protection: Built-in safeguards to protect both the inverter and your devices.
• Temperature Control: Advanced cooling system to maintain optimal performance.
• Power Saving Mode: Conserve energy when full power is not needed.
• Tri-Colour Indicators: Show input voltage and output load level for easy monitoring.
• Advanced Microprocessor: Ensures smooth and efficient operation.
• Highly Reactive & Capacitive Loads: Capable of driving these loads at start moment.
• USB Output: Conveniently charge your electronic devices without the need for additional adapters or chargers.
• Front Panel Display: Easy monitoring and control of input voltage, output power level, and fault status.
• Optional Remote Control Panel: Available separately for convenient remote operation.

Technical Specifications:

• Input Voltage: 12V
• Power: 2000W
• Output Voltage: 230V AC ± 3%
• Output Frequency: 50Hz ± 0.5Hz
• Output Waveform: Pure sine wave
• Efficiency: Up to 90%
• No-load Current Draw: <0.8A
• Protection: Overload, short circuit, high temperature
• Dimensions: 454 x 262 x 113 mm

Sterling Power's TRIDENT series waterproof battery to battery charger.

Designed to be installed between a starter battery (input) and a domestic battery (output). The Trident is designed to charge up your 12V domestic battery from the power generated from your alternator, whilst your engine is running. It is designed to work with boats or vehicles (old / new). Rated at 25A we recommend running from an alternator 60A+. The solar input is good for up to 31V and shall harvest 350W and will take power from either solar or power generated from your alternator. It shall tap into where it can get the most power from.

• Input: 12V or 24V DC.
• Output: 12V DC (25 amps max)
• Solar feed: 31V rated (max 350W).
• Dimensions: 153.5 x 131 x 40mm
• Protection: IP68 Waterproof, sealed aluminium construction.
• Four profiles: AGM/Gel, Sealed Lead Acid, Lithium, Calcium/Desulphation.
• Solar priority mode engages the unit exclusively as a solar regulator.
• Pre-wired with Anderson sockets for easy installation and disconnect.
• Includes a set of complementary Anderson sockets in the box.
• 97% efficiency.

New Sterling Power AQ series IP68 waterproof battery charger range with global AC input making it the perfect companion regardless of where you are.

• AC Input: 100-250V AC
• Output: 3 x 10A (per output) suitable for 12V, 24V or 36V systems
• Fully encapsulated to meet toughest waterproofing standard (IP68)
  
• One common charge profile to suitable all styles of batteries
  
• Clear LED charge indicators for each output
  
• Pre-wired DC: 2.3m loom with croc clip or 8mm ring for easy installation
• Pre-wired AC: 1.3m lead with UK plug
  
• Dimensions (L,W,H): 218 x 211 x 70mm
  

New Sterling Power AQ series IP68 waterproof battery charger range with global AC input making it the perfect companion regardless of where you are.

• AC Input: 100-250V AC
• Output: 2 x 10A (per output) suitable for 12V or 24V systems
• Fully encapsulated to meet toughest waterproofing standard (IP68)
  
• One common charge profile to suitable all styles of batteries
  
• Clear LED charge indicators for each output
  
• Pre-wired DC: 2.3m loom with croc clip or 8mm ring for easy installation
• Pre-wired AC: 1.3m lead with UK plug
  
• Dimensions (L,W,H): 151 x 211 x 70mm
  

Battery to battery chargers have grown in popularity over the coming years due to the ease of installation. No fiddling with complex wiring or the alternator, simply add to your battery being charged and you’re done. The battery to battery charger can charge your batteries from 5-20 times faster than a standard alternator can, making the new B2B Pro unit best value for money.

• Simple Installation
• 5-20 Times faster charge than an alternator Fire proof box
• Dynamic thermal charging
• Adjustable current limit
• 4 Stage Charging
• 9 Battery Pre-sets
• Boost/Reduce Charging
• Night Time Mode (1/2 power and quieter)
• Temperature Sensor included

• Input: 12V
• Output: 12V
• Amps In: 60A
• Size: 190 x 160 x 95mm

Single induction hob ideal for mounting on a fixed counter surface. Suitable for cooking in your van or boat. They are safer compared to gas burners and also feature fast controllable heat settings allowing you to cook with precision.—

The smooth A-grade crystal black plate is easy to wipe clean after use and also features overheat protection and auto shut-off with an induction pan on the hob. Built-in design saving counter space and giving a sleek appearance. Maximum power consumption of 1000W, suitable to be paired with an inverter to run off your 12V battery.

Specifications:

• Voltage: 230VAC | 50Hz
• Maximum Power: 1000W
• Variable Power Consumption: 8 settings (200W-1000W)
• Over Heat + Voltage + Current Protection
• Auto shut off in 1 minute without induction pan
• Plate Diameter:—195mm
• Power Source: Requires a Pure Sine Wave inverter for operation
• Coil Heating
• Cable Length: 1.5m with British Standard BS Plug
• Product Size: 195mm x 82mm
• Approvals: CE, EMC, ROHS
• Part No: IH1L

Single induction hob ideal for mounting on a fixed counter surface. Suitable for cooking in your van or boat. They are safer compared to gas burners and also feature fast controllable heat settings allowing you to cook with precision.—

The smooth A-grade crystal black plate is easy to wipe clean after use and also features overheat protection and auto shut-off with an induction pan on the hob. Built-in design saving counter space and giving a sleek appearance. Maximum power consumption of 1800W, suitable to be paired with an inverter to run off your 12V battery.

Specifications:

• Voltage: 230VAC | 50Hz
• Maximum Power: 1800W
• Variable Power Consumption: 8 settings (200W-1800W)
• Over Heat + Voltage + Current Protection
• Auto shut off in 1 minute without induction pan
• Plate Diameter:—260mm
• Power Source: Requires a Pure Sine Wave inverter for operation
• Coil Heating
• Cable Length: 1.5m with British Standard BS Plug
• Product Size: 288mm x 82mm
• Approvals: CE, EMC, ROHS
• Part No: IH1

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 2700W Power (Continuous)
• Input: 24V DC
• Output: 230V AC
• Socket Type: British/Euro
• 370 x 250 x 100mm (L,W,D)

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminium Housing - For superior heat transfer and durability.
• Built-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• 800W Power (Continuous)
• Input: 24V DC
• Output: 230V AC
• Socket Type: British/Euro
• 180 x 150 x 65mm (L,W,D)

• Voltage (input): 110/230V
• AC Frequency: 40-70Hz
• 11 pre programmed battery curves.
• 1 custom setup can be set from the charger, no need for a computer.
• 2 x digital meters for current and voltage measurement.
• 1 x power meter to show what reserve power is left on the unit.
• High voltage de-sulphating cycle.
• Low activity, standy mode to increase battery life.
• Battery health program.
• Multiple speed fan control to reduce unnecessary fan noise.
• Primary (processor digitally controlled) and an emergency backup secondary (analogue controlled) high voltage trip.
• 32 LED information panel.
• Internal scan and systems check.
• Optional remote control.
• Included battery temperature sensor.
• Units weight between 2 > 3kg.
• Dimensions (L,W,H): 260 x 215 x 90
Charge Ratings Explained: 1 x output = Max charge rate 2 x outputs = 1/2 max charge rate per battery 3 x outputs = 1/4 max charge rate per battery

• Small Size, High Power - The new revolutionary design has dropped the size of the inverter foot print by almost 50% yet improved the performance of the unit.
• Extruded Aluminum Housing - For superior heat transfer and durability.
• Bulit-in Protection & Extra Alarm Functions - High battery voltage trip, low battery voltage trip, overtemperature trip, overload rip.
• Fan Cooling - Twin fan cooling ensures maximum performance in any ambient temperatures ensuring true continuous power rated at 20 deg C ambient temperature.
• Suitable for 99% of all Household Products - Including: Microwave, hair dryer, 2000watt kettle, laptop, plasma tv, power tools, fridge, freezers etc.
• Includes Remote Control Panel with 6 mtrs Cable
• 1000W Power (Continuous)
• Input: 24V DC
• Output: 230V AC
• Socket Type: British/Euro
• 240 x 250 x 100mm (L,W,D)