Heat Shrink Terminals & Connectors

Red heat shrink 4mm female bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red heat shrink 4mm fork terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red heat shrink 4mm male bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red fully insulated heat shrink 6.3mm female spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red heat shrink 6.3mm male spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red heat shrink ring terminal for connecting to stud terminals. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Red heat shrink butt connector for joining two cables together. The cables are inserted in either end, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry points.

• Cable Size: 0.5-1.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink 5mm female bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink 5mm fork terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink 5mm male bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue fully insulated heat shrink 6.3mm female spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink 6.3mm male spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink ring terminal for connecting to stud terminals. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Blue heat shrink butt connector for joining two cables together. The cables are inserted in either end, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry points.

• Cable Size: 1.5-2.5mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink 5mm female bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink 5mm fork terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink 5mm male bullet terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow fully insulated heat shrink 6.3mm female spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink 6.3mm male spade terminal. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink ring terminal for connecting to stud terminals. The cable is inserted, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry point.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max

Yellow heat shrink butt connector for joining two cables together. The cables are inserted in either end, the connector is crimped and then heated with a hot air gun, causing the heat shrink sleeve to shrink around the crimped connector. This provides a water resistant seal around the cable entry points.

• Cable Size: 4-6mm²
• Materials: Conductor: Copper
• Insulation: Polyethylene
• Plating: Tin
• Lined with hot melt adhesive
• Shrinkable temperature: +125°C to 180°C
• Operating temperature: -45°C to +125°C
• Voltage rating: 600V max