Veratron ViewLine Combi 2 in 1 Tachometer (6000 rpm) - Trim gauge

Sizes and mounting:

• Installation (Hole) diameter and Outside diameter: 110 mm - 4 3/8 Inch and 126 mm - 5 Inch
• Installation depth: 50 mm
• Locking height with Spinlock nut: 0.5 mm - 20 mm

• #1 Analog RPM measurement range: 0 to 6.000 RPM
• #2 Trim position: Up - Down
• Sensor signal Tachometer: Alternator terminal: W
• Ignition terminal: 1
• Outboard engine: Lightning coil
• Signal input trim gauge: 167 - 10 Ohm
• Accuracy: < 3.6° of full scale reading
• Connection: Hirschmann 8 & 14 pins MQS connector

• Operating voltage: 10 to 16 Volt DC
• Current consumption: < 175 mA including warning LED's
• Reverse polarity protection: Yes - 5 Minutes
• Short circuit protection: Yes - 1 Minute
• Dial & Pointer:
• Deflection angle: RPM 240° - Trim 90°
• Dial colour: Black
• Dial Illumination: Amber LED backlight 605nm
• Pointer: White LED backlight
• Warning LED: Red (632nm)
• Programming: VDO USB software kit

• Model: VDO ViewLine Marine
• Lens: Dual - Anti-glare - Anti-Fog
• Standard bezel: Triangular chrome (Interchangeable)
• Protection and standards:
• Front protection class: IP67 (IEC 60529)
• Rear protection class: IP52
• Relative humidity: Maximum 95%
• Operating temperature: -30°C to +70°C (Chrome bezel)
• CE standard: Yes
• DNV GL Certification: Yes
• Mechanical shock continuous: 25G - 6ms - 1Hz
• Mechanical single shock 100G - 11ms
• Free fall test: 1 Meter - 3x
• Housing flame retarding: UL94-VD

• VDO ViewLine Black A2C59514259 Combi 2 in 1 Tachometer - Trim gauge
• Spinlock nut
• Bezel triangle chrome (Interchangeable)
• Adapter cable with 8 & 14 pins Hirschmann MQS connector
• Rubber seal
• QR code
• Safety instructions and installation manual
• VDO sensors not included